In this guide, we will show you how to bypass the FRP on the Wiko Power U20 smartphone. As we know, the device came out of the box with Android 11.0 powered by the latest MediaTek Helio G35 chipset.

If you are someone who has lost the Google account information to access your device after a factory reset, then this guide is for you. FRP stands for Factory Reset Protection that protects your device and information, including screen locks and data encryptions. It is enabled automatically when you add the Google account on your device and will be disabled if the Google account is removed from the device prior to the Factory Data Reset.

Pre-Requirements:

  • This guide works only on Wiko Power U20. Don’t try it on other devices.
  • You need a Windows PC or Laptop with a working USB cable.
  • Download the SP Flash Tool for bypassing via 1st method.
  • For Scatter File: Download Wiko Power U20 Firmware Flash File
  • Download MTK VCOM Drivers and install them on your computer.
  • Download and install the Wiko USB Drivers on your PC.
  • Make sure to charge your device to at least 60% before following this step.
  • Take a full backup of your device’s internal data.

After following all the pre-requirements mentioned above, now you can follow the flashing steps carefully:

Steps to ByPass FRP lock verification on Wiko Power U20

Method 1: Using SP Flash Tool

Follow these instructions carefully to remove the FRP lock via the SP Flash tool.

Warning!

You can watch our video guide to remove the FRP lock on Wiko Power U20.

Method 2: Using Infinity CM2

Follow these instructions to bypass FRP lock on Wiko Power U20 via Infinity CM2:

Method 3: Using Miracle Box Tool

Follow these instructions to bypass FRP lock on Wiko Power U20 via Miracle Box Tool

We hope that you’ve successfully bypassed the FRP Lock on your Wiko Power U20. If you’ve any issues or queries regarding this, feel free to write them down in the comments below.