In this guide, we will show you how to bypass the FRP on the Infinix Hot 12 (X6817 / X6817B) smartphone. As we know, the Infinix Hot 12 came out of the box with Android 12 on top of XOS 10.6. The device features a 6.82-inch HD+ display with a 90Hz refresh rate powered by a MediaTek Helio G85 SoC, along with up to 6GB of RAM.  Infinix Hot 12 sports a triple rear camera setup that comprises a 13 MP primary sensor, a 2 MP secondary sensor, and an AI lens.

If you are someone who has lost the Google account information to access your device after a factory reset, then this guide is for you. FRP stands for Factory Reset Protection which protects your device and information, including screen locks and data encryptions. It is enabled automatically when you add the Google account to your device and will be disabled if the Google account is removed from the device prior to the Factory Data Reset.

Infinix Hot 12 Device Overview:

The Infinix Hot 12 features a 6.82 inches IPS LCD panel with a 90 Hz refresh rate. It is an HD+ panel with a 720 x 1612 pixels resolution and an aspect ratio of 20:9. Under the hood, we get the MediaTek Helio G85 processor built on a 12nm manufacturing process. It is an octa-core processor with two Cortex-A75 cores clocked at 2.0 GHz and six Cortex-A55 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Mali-G52 MC2. The smartphone comes with Android 12 out of the box with XOS 10.6 skin running on it.

In terms of optics, we get a triple camera setup at the rear and a single selfie camera at the front. The triple rear camera setup consists of a 13MP primary sensor paired with an f/1.8 lens, a 2MP depth sensor, and a QVGA sensor. The selfie camera at the front is an 8MP primary sensor. The front and back camera systems are limited to 1080p video recording.

The smartphone comes with a single storage variant with 128GB of internal storage and 6GB of RAM. We also get a dedicated microSD slot for storage expansion. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac, Bluetooth, GPS, FM radio, and USB Type C. For sensors, we get a side-mounted fingerprint sensor, accelerometer, proximity, and compass. Powering it all is a 5,000 mAh battery that can be topped up quickly using an 18W power adapter. The smartphone is available in four colour options: Racing Black, Legend White, Origin Blue, and Lucky Green.

Pre-Requirements:

  • This guide works only on Infinix Hot 12 (X6817 / X6817B). Don’t try it on other devices.
  • You need a Windows PC or Laptop with a working USB cable.
  • Download the SP Flash Tool for bypassing via 1st method.
  • For Scatter File: Download Infinix Hot 12 (X6817 / X6817B) Firmware Flash File
  • Download MTK VCOM Drivers and install them on your computer.
  • Download and install the Infinix USB Drivers on your PC.
  • Make sure to charge your device to at least 60% before following this step.
  • Take a full backup of your device’s internal data.

After following all the pre-requirements mentioned above, now you can follow the flashing steps carefully:

Steps to ByPass FRP lock verification on Infinix Hot 12

Method 1: Using SP Flash Tool

Follow these instructions carefully to remove the FRP lock on the Infinix Hot 12 MediaTek-powered device via the SP Flash tool.

Warning!

You can watch our video guide to remove the FRP lock on Infinix Hot 12.

Method 2: Using Infinity CM2

Follow these instructions to bypass FRP lock on Infinix Hot 12 via Infinity CM2:

Method 3: Using Miracle Box Tool

Follow these instructions to bypass FRP lock on Infinix Hot 12 via Miracle Box Tool

We hope that you’ve successfully bypassed the FRP Lock on your Infinix Hot 12 (X6817 / X6817B). If you’ve any issues or queries regarding this, feel free to write them down in the comments below.